Category Computers & Electronics

Commercial Electrician in Perth – Get One on a Retainer Basis

Any building, residential or commercial, will need the services of a good electrician all the time. Some minor complaints can be attended to by the individual in a house or some technician in a small business enterprise. But for any electrical defect or malfunctioning or other work, you need to call a good electrician. There is usually the belief in the trade that a fault in an electrical system takes longer to detect and much less time to rectify. So a commercial electrician Perth market has must have the background and experience to make a few checks and quickly identify the fault and rectify it. A commercial electrician is also expected to be skilled at installing new systems of wiring or other equipment in commercial premises, comprising schools, offices and many public places.

Qualification and Experience Count a Lot

In the area of electrical installations, there are many statutory regulations that have to be met. While there are laws and standards stipulated for all the electrical components used, like the cables and the fuse gear and so on, the electrician attending to all these works must possess the necessary certifications, and only a licensed individual can undertake the job of a commercial electrician Perth wide.

Different Services Undertaken

The commercial electrician can be relied upon to handle a host of services. It is a myth that the electricians are there to just respond to complaints 24 hours of the day. In reality, they are expected to attend to a large number of related activities. In any commercial establishment, there will be many types of devices fixed and if any of them fail to function, either due to a fault in the device or if the power point does not function, the commercial electrician is asked to attend to it. If the device is found to be faulty, the building owner will ask the electrician to replace the device and pay for it along with the service charges for the work. If the electrical point or the switch or the plug socket is faulty, then that it has to be replaced.

If the commercial electrician is engaged on a retainer basis, then there might not be a need to pay for each visit and only the actual cost of components used has to be reimbursed.

Get Fresh Systems Installed

If your office or factory needs some new electrical wiring to be done for an extension or a new machine to be commissioned, the commercial electrician Perth based can design and install the whole thing. In the case of larger installations, an individual electrician might not be able to handle, and an electrical contracting firm might have to be roped in. But your regular commercial electrician will still have a role to play, and you must keep him in the loop. Long after a new building has been completed and handed over for every small fault, you won’t be able to call the large firm to send their electrician. They might also end up sending a fat bill for the services. Your neighbourhood commercial electrician is always the best bet.

Read More

What You Need to Look for When Buying LED Strip Lights

The kind of lighting fixtures that you install in a room can greatly alter the atmosphere any room. This is why 12V LED strip lights are such a popular lighting product for many people. If you are looking for range in your lighting beyond the mere conventional lighting installations, then these are installations that you should seriously consider. They provide great secondary lighting for any space in which they are installed and can be used in lighting up some of those hard to light up spaces.

Apart from the functional uses of lighting up the “tricky” corners, these LED strips lights can also be used to add some colorful accents to any room. They are excellent candidates for mood-lighting applications thanks to their versatility. You can tune them in order to bring out the desired mood in any room or space in the house.

The finished lighting ambiance that you will create in your spaces is also dependent on the kind of 12V LED strip lights that you choose. If you go for quality, you can look forward to quality lighting fixtures and durability in your lighting installations. Generally, the LED strip lights are not the same since the manufacturers are not the same. Just like cars or virtually any other consumer product, some manufacturers take their time and go into meticulous detail in order to make the best products for consumers. On the other hand, there are manufacturers who cut corners in order to pursue profits over the short term. So, even with the LED strip lights, you have to do some due diligence in order to ensure that you choose the best products in the marketplace.

When it comes to the 12V LED strip lights that you are likely to purchase in the marketplace, differences will arise in various elements in the manufacture of the lighting products. Manufacturers used different qualities of chips, coatings and resistors in order to manufacture the strip lighting product and this also goes on to impact the quality of the final product. Where there is high quality, this of course necessitates a higher price but it is a worthy investment. When you buy cheap, you are likely to buy twice and hence spend even more over the long term.

When buying the LED strips, spend on quality. With the great innovation that has happened in LED technology, quality will not cost you a fortune when it comes to these products. Here are some of the key elements that you should look out for when you are buying the LED strips:

The Number of LED chips as well as the distance separating them in each strip

The strip should have the right kind of cheap density in order to guarantee a great natural-looking luminosity. Please note that some cheap manufacturers may put less number of chips in the strip which results in an unsightly lighting.

The PCB Track

The track of the PCB should generally be thicker for better conductivity and heat dissipation. Low-cost manufacturers will likely attempt to cut corners by using thinner strips which have poor heat dissipation due to the high resistance. This will in turn lead to an earlier failure or deterioration of the LED strip light.

The Resistors

Small and cheap resistors might provide good luminosity but they put extra load on the LED chips which could in turn shorten their lifespan. Quality LED trip lights have the appropriate level of resistors that are longer lasting and also provide good quality luminosity.

Coating

Good quality LED strips have a uniform, stable and odourless coating.

Look for these qualities when you are purchasing your 12V LED strip lights in order to be assured of good quality performance of your LED lighting. For the best quality chips, check outhttp://www.worldofthought.com.au.

Read More

4 Factors to Consider when Buying a Digital Multimeter

A multimeter is an instrument used to measure voltage, electric current, and resistance. It is very useful in any industry. But the primary users are electricians, electrical engineers, technicians who deal with electricity and power.

Multimeter

Multimeter

 

Analog vs. Digital

There are two types of multimeters. One is the analog type and the other is the digital type. The most evident difference between the two types is the display, where the analog multimeter uses a needle to show the value on a scale, while the digital type shows digital values.

Though the analog multimeters have high sensitivity when checking diodes, they, on the other hand, can be difficult to use by new users. This makes a digital multimeter more handy for most users.

Most professionals in Australia or anywhere in the world use the digital type of multimeter as this is easier to read aside from being accurate. The reading is shown in digits on LED or LCD screens. These days, analog multimeters are considered a thing of the past.

Things to Think About

When shopping for a multimeter in Australia, the following factors are some things to be considered.

  • Price

There are a lot of multimeter brands which you can choose from, with price ranging from $15 to more or less $1300. As expected, high-priced multimeters are more durable and accurate compared to lower-priced ones. Click here Rapid-Tech Equipment for more details.

Also, other added features make expensive multimeters more efficient and convenient to use. Choosing a pricey yet durable multimeter Australia can offer makes it worth every dime. Just choose a store that carries a wide range of multimeter brands like that of Rapid-Tech Equipment to give you a wide range of options as well.

  • Functionality

A basic multimeter is made with standard features to measure AC and DC current, resistance, voltage, and capacity. However, there are more complex multimeters with advanced features like diode test, transistor test, battery test, and other special functions, making them extra useful than the basic multimeters.

  • Display Counts and Digits

The display counts and digits play a vital role in using multimeters. Choose a multimeter with higher display count as this means higher conversion of the exact values of the unit being tested.

  • Safety

The voltage that will pass through the multimeter’s scale will depend on its source. When dealing with high voltages, checking the kind of multimeter to use will keep you from harm. It is very important to be knowledgeable with multimeters, and considering the use of a clamp meter is equally important.

Considering Clamp Meters

A clamp meter is another electrical test tool which is a combination of a standard digital multimeter and a current tester or sensor. It is used to measure current, designed as a hinged jaw which allows electricians to simply clamp the jaws around a live wire, reading the flow of current without disconnecting any circuit.

Unlike any multimeter, a clamp meter is ideal for major electrical work as it can measure large currents. If you find multimeter Australia provider, bear in mind to keep a clamp meter as well to complete your electrical tool kit.

Read More