Choosing blades for your concrete cutter

With scientists describing diamond as a hard material that can resist wear and tear, it is the best choice for accomplishing concrete cutting jobs. However, still it can be quite difficult to decide on the best blades to be used in a concrete cutter Caboolture professionals and the rest in Brisbane recommend. The question, therefore, becomes how you are going to choose the best blade to deliver professional cuts in concrete. To ensure that you achieve optimum cutting performance for your investment, follow the guide that this article provides before making a purchase of a concrete cutter.

Concrete cutter caboolture

How do diamond blades work

It’s very fundamental that you first know how a diamond blade works to help you select a blade that possesses the right characteristics that will answer to your needs. The most basic components of the blade include the metal core, the synthetic diamond crystals, the matrix, and the weld. It’s the exposed diamonds on the surface of the cutting segments that slice through as the blade rotates at a high speed. The matrix serves to control how fast a blade wears.

Use the right diamond blade

To achieve maximum speed and blade life, it is necessary that you match the blade closely to the material you are cutting. You also need to know the strength, size, hardness of the aggregate and type of the sand in relation to the concrete to determine appropriately the kind of blade to be used for the job. For example, for the soft abrasive concrete, a concrete cutter in Caboolture with blades that have a hard bond is recommended and soft bond for the high concrete. Check out Gregs Concrete Cutting and Drilling

Cut concrete at the right time

The timing of the cut will normally determine the type of blade that you are going to use. There are concrete contractors that will normally prefer cutting concrete while it’s still green as this will minimize the occurrence of random cracking and also allows for shallower joints. Hard bonded blades are usually designed for blades meant to cut green concrete.

Wet cutting vs. dry cutting

The decision of whether to cut wet or dry concrete is often dependent on preference and the job requirements. Dry cutting eliminates the messy wet slurry and the need to equip your concrete cutter caboolture shops sell with water tanks and hoses. Using blade wet, on the other hand, will minimize dust but makes it necessary to contain or clean up slurry.

Concrete blades compatibility

Usually manufacturers avail blades with a chart that will detail the recommended operating speeds as well the maximum safe operating speeds for their blades. It’s important that the blade and the speed range of the Caboolture concrete cutter be matching as when you operate the blade at a low  speed than recommended you reduce its cutting performance and also once the maximum speed is exceeded the blade gets damaged.

By following the steps that have been outlined, you will land the perfect blade for your concrete cutter Caboolture professionals recommend that will best accomplish your sawing project. Be careful on cheap concrete cutter in Caboolture as sometimes they may not guarantee quality.

Leave a reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>